Thursday, September 25, 2014

Padlock Opening Tip

With all my years of experience in the locksmith field, I came to ind that bolt cutters, are the locksmith's ultimate tool for removing padlocks in the fastest way. These cutters will cut the shackle of most padlocks in seconds. Many locksmith technicians carry a supply of the lower priced padlocks in their inventory for replacement. From my experience, low priced padlocks are rarely worth spending any amount of money on them. In most cases it is more worth it to replace them.

Another method I found working on Masterlock padlocks was using pick tools. Using my pick tools on a Masterlock padlock worked very well and most of the time I was able to unlock it on the first stroke. They way it is done, you insert the tension pick, but without putting tension on it just yet. Now insert the pick tool to the back wall and let it hang. Now that both picks are in place, put a little tension on the tension pick, play with the other pick a little and rip it off. Then, put both pick tools again in place, and while you put a little bit of tension on the tension pick tool, insert the other pick all the way in and make sure it flops. If it doesn't, it means you are to far in. Try again, and this time if it flops while you play with it, the padlock should open right away.

Visit the following links for more information about locksmith services in Portland, Oregon | Locksmith solutions in Portland.

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.