During my years as a
locksmith technician, I got called many times for a job to re-pin a Schlage type removable cores. Once the cylinder cap is removed on the Schlage removable core cylinders, a Weiser Cylinder Cap Tool with the round notches can be used and should work just fine. However, the hole that is found on the tool, would need to be covered with a finger possibly in order to prevent the retaining pin from flying away in case the tool will get off center. should the tool get a little off center.
When doing a re-key job on these cylinders, it is a good practice to develop a habit to hold the finger over the control pin as the pins are coming out of the plug. Otherwise, it can be a hassle and a waste of time searching for this specialized pin among the scrap brass or the floor of the service vehicle. Quickly, a control key can be made for these cylinders from a standard 6-pin blank by filing the shoulder back to match a 7- pin blank. Next, the customers key can be duplicated, and in the seventh space cut the key to a #6 depth. Now, the cut would need to be ran off the tip of the blank so the tip would be flat.
Visit the following links for information about about
locksmith services in Portland, Oregon. |
Portland locksmith solutions.
